acrylic panel cutter
Big acrylic panel cutting machine
Summary of BM1
This is consist of main body, clamp, assist board and dust collector. It uses 8~12 inch of Circular saw blade. And Circular saw blade’s motions can be finely regulated.
– Saw blade’s movement back and forth also can be finely regulated.
– With the digital scale attached in the machine, user can do fine/precise work.
– Two Operation mode : manual and automatic.
– Timer : With this, the machine can pause during the work.
|Frequency||50 ~ 60Hz|
|Circular Saw Blade||200~300mm|
|Maximum Cutting Capability||2500mm x 1280mm x 50mm (thickness)|
|Size (L x W x H)||3550mm x 2300mm x 1660mm|
|3550mm x 2980mm(secondary table) x 1660mm|
Feature of BM1
1) Double Splitting Auto Clamp
Other existing conventional cutting machines applies only air pressure that frequently occur bias in panel cutting and frequent break down. However, BM1’s clamp is applied worm gear and it is doubly splitted. So that it is unbiased when even cut the thick panels.
2) Saw Blade Position Indicator
It is possible to check the saw blade’s position
Depends on the materials and the size of work, saw blade’s position can be adjustable
It can gurantee the safety and eliminate the error during work
3) Installation of Clamp Safety Cover
By equipping a number of clamp type safety covers, in case of thick and small panel cuttings, it will protect user’s hand.
4) Backward Point Indicator
Backward point is indicated in numbers that letting users to know how much the main
axis will be backward after each cutting movement.
5) Built-in Dust Collector and Box
Other conventional cutting machines’ dust collectors are located at outer that requires extra space for it. However, BM1’s dust collector is located at inside of the machinery that doesn’t require extra space for it.
6) Applying Rail Road at Main Axis Movement
At LM guide stands for main movement, it applies train railroad. Train railroad is welded and precisely processed that guarantees its stable movement for a long time.
7) Application of Timing Belt and Gear
By applying timing belt and gear at the main motor’s power transmission part, it will maintain its initial deliberate performance for a long time. Even for cutting thick panel, there’s no no-load-operation on the saw blade
8) Table Plate Cross-joint Fine Adjustment
By adjusting plate bolt on the table, it can control cross-joint precisely
Cuttable Plates with BM1
Softer plates than acrylic panel are cuttable, such as acrylic plate, PC, wood, plywood. Foam plastic plate is also cuttable. Thickness up to 50mm is cuttable, and plate size up to 1240mm x 2500mm is cuttable.